Asus GigaX2024B - Manual (Page 32)

GigaX2024B/M L2 Managed Switch CLI Manual
12
Command Mode Interface mode
No/clear
no garp leaveall-timer
Show show garp timer IFNAME
Default The default is 1000 (centi-seconds)
Description This command sets the garp leaveall-timer value in the indicated
interface port.
Example ASUS(config-if)#garp leaveall-time 2000
4.10 garp leave-timer <1-100000000>
Syntax garp leave-timer <1-100000000>
Parameters leaveall-timer Leaveall timer
<1-100000000> the timer values
Command Mode Interface mode
No/clear
no garp leave-timer
Show show garp timer IFNAME
Default The default is 60 (centi-seconds)
Description This command sets the garp leave-timer value in the indicated
interface port.
Example ASUS(config-if)#garp leave-timer 60
4.11 show garp timer IFNAME
Syntax show garp timer IFNAME
Parameters timer the setting timer values (join, leave, and
leaveall timer)
[IFNAME] Interface’s name, ex: fastethernet1/0/1 or
gigabitethernet1/0/26
Command Mode Privileged EXEC mode
Default
Description
To show garp timer IFNAME status.
Example ASUS# show garp timer fa1/0/1