Asus GigaX2024B - Manual (Page 25)

GigaX2024B/M L2 Managed Switch CLI Manual
5
LACP:
2.1 lacp aggregation-link group <1-32> (add|set)
IFLIST
GX2024B GROUPID range is 1-6
Syntax
lacp aggregation-link trunk <1-32> (add|set) IFLIST
Parameters aggregation-link aggregation-link
<1-32> GROUPID
add append ports to lacp enabled port list
set set lacp enabled port list for this group
PORTLIST valid format is port_id,[,port_id...],[-port_id,...],...
Command Mode Configure terminal mode
No/clear
lacp aggregation-link group delete IFNAME
no lacp aggregation-link group <1-32>
Show show lacp [GROUPID]
Default No default lacp aggregation-link trunk group enable
Description This command sets the Link Aggregation Control Protocol (LACP)
operation add/set for the trunk group ports on the switch stack or
on a standalone switch.
Example ASUS(config)# lacp aggregation-link group <1-32> (add|set)
fa1/0/1-4
2.2 lacp aggregation-link group delete IFNAME
Syntax lacp aggregation-link group delete IFNAME
Parameters aggregation-link aggregation-link
group group
delete remove ports from lacp enabled port list
IFNAME interface name
Command Mode Configure terminal mode