Asus GigaX2024B - Manual (Page 157)

GigaX2024B/M L2 Managed Switch CLI Manual
137
deny-> Specify packets to reject.
IPADDR Source address
MASK Source address mask
[IFNAME] Egress interface name
Command Mode Configure terminal mode
No/clear
no access-list (<1-99>|<1300-1999>) (deny|permit) IPADDR
MASK [IFNAME]
Show Show acces-lists [number|name]
Default
Description
This command specify one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config)# access-list 99 permit 1.1.1.1 0.255.255.0
13.68 a c c e s s - l i s t ( < 1 - 9 9 > | < 1 3 0 0 - 1 9 9 9 > )
(deny|permit) host IPADDR [IFNAME]
Syntax access-list (<1-99>|<1300-1999>) (deny|permit) host IPADDR
[IFNAME]
Parameters Access-list Add an access list entry
<1-99> -> standard IP access-list number
<1300-1999> -> standard IP access-list number (expanded
range)
permit-> Specify packets to forward
deny-> Specify packets to reject.
Host A single host address
IPADDR Source address
[IFNAME] Egress interface name
Command Mode Configure terminal mode
No/clear
no access-list (<1-99>|<1300-1999>) (deny|permit) host IPADDR
[IFNAME]
Show Show acces-lists [number|name]
Default