Asus GigaX2024B - Manual (Page 156)

GigaX2024B/M L2 Managed Switch CLI Manual
136
No/clear no remark
Show Show running-config
Default
Description
This command add a description to a specify ACL group.
Examples ASUS(config-std-nacl)# remark abc
13.66 access-list (<1-99>|<100-199>|<1300-1999>|<2
000-2699>) remark .LINE
Syntax access-list (<1-99>|<100-199>|<1300-1999>|<2000-2699>)
remark .LINE
Parameters .LINE string
Command Mode Configure terminal mode
No/clear
no access-list (<1-99>|<100-199>|<1300-1999>|<2000-2699>)
remark .LINE
no access-list (<1-99>|<100-199>|<1300-1999>|<2000-2699>)
remark
Show Show acces-lists [number|name]
Default
Description
This command is to add a description with a specify access-list
number.
Examples ASUS(config)# access-list 22 remark asus
13.67 a c c e s s - l i s t ( < 1 - 9 9 > | < 1 3 0 0 - 1 9 9 9 > )
(deny|permit) IPADDR MASK [IFNAME]
Syntax access-list (<1-99>|<1300-1999>) (deny|permit) IPADDR
A.B.C.D [IFNAME]
Parameters Access-list Add an access list entry
<1-99> -> standard IP access-list number
<1300-1999> -> standard IP access-list number (expanded
range)
permit-> Specify packets to forward