Asus GigaX2024B - Manual (Page 146)

GigaX2024B/M L2 Managed Switch CLI Manual
126
13.51 (permit|deny) (tcp|udp) host IPADDR [eq]
[<0-65535>] IPADDR MASK [IFNAME]
Syntax (permit|deny) (tcp|udp) host IPADDR [eq] [<0-65535>] IPADDR
MASK [IFNAME]
Parameters permit-> Specify packets to forward
deny-> Specify packets to reject.
Tcp-> Transmission Control Protocol
Udp-> User Datagram Protocol
host A single source host
IPADDR Source address
eq Match only packets on a given port numbe
<0-65535> Port number
IPADDR Destination address
MASK Destination address mask
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear
no (permit|deny) (tcp|udp) host IPADDR [eq] [<0-65535>]
IPADDR MASK [IFNAME]
Show Show acces-lists [number|name]
Default
Description
This command specify one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config-ext-acl)#permit tcp host 10.0.0.1 eq 2 10.0.0.2
0.0.0.0 [fa1/0/1]
13.52 (permit|deny) (tcp|udp) host IPADDR IPADDR
MASK [eq] [<0-65535>] [IFNAME]
Syntax (permit|deny) (tcp|udp) host IPADDR IPADDR MASK [eq]
[<0-65535>] [IFNAME]
Parameters permit-> Specify packets to forward