Asus GigaX2024B - Manual (Page 114)

GigaX2024B/M L2 Managed Switch CLI Manual
94
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config-ext-acl)#permit ip any any [fa1/0/1]
13.11 (permit|deny) (tcp|udp) any [eq] [<0-65535>]
any [eq] [<0-65535>] [IFNAME]
Syntax (permit|deny) (tcp|udp) any [eq] [<0-65535>] any [eq] [<0-65535>]
[IFNAME]
Parameters permit-> Specify packets to forward
deny-> Specify packets to reject.
Tcp-> Transmission Control Protocol
Udp-> User Datagram Protocol
any any source address
eq Match only packets on a given port numbe
<0-65535> Port number
any any destination address
eq Match only packets on a given port numbe
<0-65535> Port number
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear
no (permit|deny) (tcp|udp) any [eq] [<0-65535>] any [eq]
[<0-65535>] [IFNAME]
Show Show acces-lists [number|name]
Default
Description
This command specify one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config-ext-acl)#permit tcp any eq 100 any eq 100 [fa1/0/1]
13.12 (permit|deny) icmp any any [<1-255>] code
[<1-255>] [IFNAME]
Syntax (permit|deny) icmp any any [<1-255>] code [<1-255>] [IFNAME]