Asus GigaX2024B - Manual (Page 55)

GigaX2024B/M L2 Managed Switch CLI Manual
35
Default No static addresses are configured.
Description Use the mac-address-table static configuration command on
the switch stack or on a standalone switch to add unicast static
addresses to the MAC address table.
Example ASUS(config)# mac-address-table static 0000.0000.0001 2
fa1/0/2
10.6 mac-address-table multicast MACADDR vlan
VLANID interface IFLIST COS_DEST
Syntax mac-address-table multicast MACADDR vlan VLANID interface
IFLIST COS_DEST
Parameters multicast Multicast
MACADDR Destination MAC address xxxx.xxxx.xxxx
(multicast) to the address table
vlan Vlan
VLANID Valid range is 1 ~ 3000
interface the specified interface
IFNAME Interface’s name, ex: fa1/0/1 or fa1/0/12
COS_DEST COS prioriyt
Command Mode Configure terminal mode
No/clear
Show
Default
No static addresses are configured.
Description Use the ac-address-table multicast configuration command on
the switch stack or on a standalone switch to add multicast static
addresses to the MAC address table.
Example ASUS(config)# mac-address-table multicast 0100.5e0a.0a0a
vlan 1 interface fa1/0/2-5 3
10.7 no mac-address-table multicast MACADDR
vlan VLANID interface IFLIST COS_DEST
Syntax no mac-address-table multicast MACADDR vlan VLANID