Asus GigaX2024B - Manual (Page 217)

GigaX2024B/M L2 Managed Switch CLI Manual
197
Description This command shows the interface detail status with specific
stack .
Examples ASUS#show interface stack 1
15.8 interface vlanVLAN-ID
Syntax interface vlanVLAN-ID
Parameters vlan Select a vlan to configure
VLAN-ID Vlan’s id
Command Mode Configure terminal mode
No/clear
Show
show vlan[VLANID]
Default
Description
This command changes the system vlan to specific vlan interface
command mode.
Examples ASUS(config)#interface vlan1
15.9 ip address A.B.C.D/M
Syntax ip address A.B.C.D/M
Parameters address Set the IP address of an interface
A.B.C.D/M IP address (e.g. 10.0.0.1/8)
Command Mode L3 Interface mode
No/clear
no ip address A.B.C.D/M
Show show running-config
Default
Description
This command sets the ip address for indicated interface.
Examples ASUS(config-if)# ip address 192.192.1.11/24
15.10 acceptable frame-type
Syntax acceptable frame-type (all| discardall| vlan-tagged-only)
Parameters all -> any kind of frame type is accepted