Asus GigaX2024B User Manual
Page 138
![background image](/manuals/303707/138/background.png)
GigaX2024B/M L2 Managed Switch CLI Manual
118
[IFNAME]
Show
Show acces-lists [number|name]
Default
Description
This command specify one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples
ASUS(config-ext-acl)# permit tcp 10.0.0.1 0.0.0.0 any eq 22
[fa1/0/1]
13.41 (permit|deny) (tcp|udp) IPADDR MASK [eq]
[<0-65535>] host IPADDR [IFNAME]
Syntax
(permit|deny) (tcp|udp) IPADDR MASK [eq] [<0-65535>] host
IPADDR [IFNAME]
Parameters
permit->
Specify packets to forward
deny->
Specify packets to reject.
Tcp->
Transmission Control Protocol
Udp->
User Datagram Protocol
IPADDR
Source address
MASK
Source address mask
eq
Match only packets on a given port numbe
<0-65535>
Port number
host
A single destination host
IPADDR
Destination address
[IFNAME]
Egress interface name
Command Mode IP extended access-list mode
No/clear
no (permit|deny) (tcp|udp) IPADDR MASK [eq] [<0-65535>] host
IPADDR [IFNAME]
Show
Show acces-lists [number|name]
Default
Description
This command specify one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples
ASUS(config-ext-acl)#permit tcp 10.0.0.1 0.0.0.0 eq 2 host