Asus GigaX2008EX User Manual

Page 51

GigaX2008EX L2 Managed Switch User Manual

[Query by VLAN ID]
ARL entries existed in ARL table can be queried according to VLAN ID.

CLI command: l2 arl vlan

[Query by MAC Address]
ARL entries existed in ARL table can be queried according to MAC address.

CLI command: l2 arl mac [vlan id]

[MAC Address]
[VLAN ID]
[Port Selection]
User can add or modify a static ARL entry by specifying a MAC address, VLAN

ID, port number, and trunk ID.

CLI command: l2 arl static

[Remove]
Static ARL entries can be deleted by indicating the MAC address and its VLAN

ID. These two-ﬁeld combination is formed as unique entry in ARL table.

CLI command: l2 arl delete

[Reload]
Restores the previous saved settings from conﬁguration ﬁle.

CLI command: l2 arl retrieve

[Show VLAN]
Displays the existing VLAN information of the switch.

CLI command: l2 vlan show

[Name]

[VLAN ID]
Allows user to conﬁg the VLAN settings. User may create a new VLAN by giving

a unique VLAN ID, a VLAN description name, and its port member list, note

that the port member here is indicated as tagged port member. To specify a

VLAN port member as untagged port, CLI command utportadd can achieve this

purpose. User may use CLI command add or remove to further add some port

members to a VLAN or exclude some existing port members from a VLAN.

CLI command: l2 vlan create
CLI command: l2 vlan add