Asus GigaX2008EX User Manual

Page 48

GigaX2008EX L2 Managed Switch User Manual

CLI command: net interface vlan sw0

[IP Address]
Displays the static IP address for the switch. This IP address is used for

manageable purpose, i.e.; network applications such as, http server, SNMP

server, ftp server, telnet server and SSH server of the switch are all using this IP

address.

CLI command: net interface ip sw0 < IP address>

[Network Mask]
Displays the subnet mask for the switch.

CLI command: net interface ip sw0 < IP address>

[Default Gateway]
Displays the IP address of the default gateway. This ﬁeld is necessary if the

switch network contains one or more routers.

CLI command: net route static add

[Password Protection is] [Enabled/Disabled]
When the password protection is enabled, the web interface will request a user

name and password authentication while user accesses the switch through the

browser.

CLI command: sys web set

[New Password] / [Verify Password]
The default user name is admin. By default, a password is not required. You

may set a password by conﬁguring these ﬁelds.

CLI command: sys users modify
user name (old user name, ʻadminʼ by default):
password (old password,):

[Reboot]
User can reboot the switch by issuing the reboot command.

CLI command: sys reboot

[Upload]
No CLI command for this function. Refer to Boot ROM commands for this function.