V. sco unix drivers – Asus P/I-P65UP8/CP6ND User Manual
Page 71
ASUS P/I-P65UP8 User’s Manual
71
V. SCO UNIX DRIVERS
5
Adding a SCSI CD-ROM Drive.
NOTE: If you are not adding a SCSI CD-ROM drive to this system, go to Step 6.
a.
Select option 5 from the CAM3 main menu to show the SCSI
configuration. Note the host adapter number of each Symbios Logic
host adapter. You need these throughout this installation procedure.
b.
From the CAM3 main menu, select option 2 to add or remove specific
devices. A list appears showing the current configuration followed by a
menu of choices. To add a CD-ROM drive, select option 3 and press
Enter.
c.
Instructions on using a CD-ROM drive are displayed. Press Enter two
more times at the prompts to scroll through the explanatory text and start
the mkdev cdrom utility for installing a CD-ROM drive.
d.
The CD-ROM Configuration Program menu appears. Select option 1 to
install a CD-ROM drive and press Enter.
e.
The system prompts to configure the CD-ROM Drive. Type y and press
Enter.
f.
The system prompts for the identifier of the host adapter that supports this
device. If the default is correct, press Enter. If the default is not correct,
type: bhba if your SCO UNIX is release 3.2v4x, or slha if your SCO
UNIX is OpenServer. Press Enter.
g.
The system prompts for which host adapter supports the CD-ROM drive.
Type the correct host adapter number and press Enter.
If this is the first Symbios Logic host adapter added to the SCO UNIX
kernel, the system prompts if you want to update the link-kit (add another
host adapter). Type y and press Enter. If you entered the host adapter
number incorrectly, type n, and press Enter. The system prompts for the
host adapter identifier of the preceding step.
h.
With SCO OpenServer, the system prompts for the bus number of the CD-
ROM. Since Symbios Logic host adapters support only one bus per adapter,
press Enter to get the default of zero, or type 0 (zero) and press Enter.
With SCO 3.2v4x, this prompt does not appear. Proceed to the next step.
i.
The system prompts for the SCSI ID of the CD-ROM Drive. Type the
SCSI ID number and press Enter.
j.
The system prompts for the LUN (Logical Unit Number) of the CD-ROM
drive. Type 0 (zero) and press Enter.
V
. SCO UNIX
(Installation)