Asus P/I-P65UP8/CP6ND - Manual (Page 37)

ASUS P/I-P65UP8 User’s Manual 37
II. WINDOWS 95 DRIVERS
II. WINDOWS 95
(Additional Information)
Important Additional Information
Enabling/Disabling Ultra SCSI (Fast 20) Support
Once the SYMC8XX.MPD driver is installed, support for Ultra SCSI (Fast 20) is
enabled or disabled using the Device Manager. Ultra SCSI is enabled/disabled on a
per adapter basis. Use this procedure for enabling/disabling Ultra SCSI Support:
1. Click the Start button, move to Settings, Control Panel, and click.
Double-click on the System icon. Click the Device Manager tab.
2. Either double-click on the SCSI controllers entry, or click once on the plus
sign to the left of it. One entry for each host adapter installed in the system is
displayed. Select the adapter desired, then click the Properties button. Click
the Settings tab.
3. The Adapter settings entry will display “Fast20_Support=x;”, where x is 0 or
1. Do not change anything but the number just to the right of the equal sign.
Set this number to:
1 for Ultra SCSI (Fast 20) enabled
0 for Ultra SCSI (Fast 20) disabled
4. Click OK to exit the Settings tab.
5. Click OK again. If the entry was changed, the “System Settings Change”
dialog box is displayed. Click Yes to restart the computer. After the system
reboots, the new setting for Ultra SCSI (Fast 20) is in effect.