Asus P/I-P65UP8/CP6ND - Manual (Page 70)

70 ASUS P/I-P65UP8 User’s Manual
V. SCO UNIX DRIVERS
c. Instructions on using a SCSI tape drive are displayed. Press Enter at the
next three prompts to scroll through the explanatory text and start the mkdev
tape utility for installing a tape drive.
d. The Tape Drive Configuration Program menu appears. Select option 1 to
install a tape drive, and press Enter.
e. The Tape Drive Installation Menu appears. Select option 4 to install a
SCSI tape drive, and press Enter. From the next list select the type of
SCSI tape drive to install, and press Enter.
f. The system prompts to configure the tape drive. Type y and press Enter.
g. The system prompts for the identifier of the host adapter that supports this
device. If the default is correct, press Enter. If the default is not correct,
type: bhba if your SCO UNIX is release 3.2v4x, or slha if your SCO
UNIX is OpenServer. Press Enter.
h. The system prompts for which host adapter supports the tape drive. Type
the correct host adapter number and press Enter.
If this is the first Symbios Logic host adapter added to the SCO UNIX
kernel, the system prompts if you want to update the link-kit (add another
host adapter). Type y and press Enter. If you entered the host adapter
number incorrectly, type n, and press Enter. The system prompts for the
host adapter identifier of the preceding step.
i. With SCO OpenServer, the system prompts for the bus number of the tape
drive. Since Symbios Logic host adapters support only one bus per adapter,
press Enter to get the default of zero, or type 0 (zero) and press Enter.
With SCO 3.2v4x, this prompt does not appear. Proceed to the next step.
j. The system prompts for the SCSI ID of the tape drive. Type the SCSI ID
number of the tape drive and press Enter.
k. The system prompts for the LUN (Logical Unit Number) of the tape drive.
Type 0 (zero) and press Enter. The system then prompts to update the
SCSI configuration file. Type y and press Enter.
l. A list is displayed showing the special devices created. Press Enter, and
a list is displayed showing the links to the installed tape drive. When
prompted for a boot string, type q and press Enter to return to the Tape
Drive Configuration Program menu. Type q and press Enter to terminate
the Tape Drive Configuration Program menu.
m. A prompt appears to create a new kernel. Type n (as this is done later) and
press Enter to return to the CAM3 main menu.
V
. SCO UNIX
(Installation)