Asus RS260-E4/RX8 - Manual (Page 72)

4-8 Chapter 4: Motherboard information
4. Keyboard power (3-pin KBPWR1)
This jumper allows you to enable or disable the keyboard wake-up feature.
Set this jumper to pins 2-3 (+5VSB) to wake up the computer when you press
a key on the keyboard (the default is the Space Bar). This feature requires
an ATX power supply that can supply at least 1A on the +5VSB lead, and a
corresponding setting in the BIOS.
5. VGA controller setting (3-pin VGA_EN1)
These jumpers allow you to enable or disable the onboard VGA controller.
Set to pins 1-2 to activate the VGA feature.
®
DSBF-D12/2U/SAS Keyboard power setting
KBPWR1
(Default)
+5V +5VSB
3 2 2 1
®
DSBF-D12/2U/SAS VGA setting
VGA_EN1
1 2 2 3
Enable
(Default)
Disable