Asus RS260-E4/RX8 - Manual (Page 127)

ASUS RS260-E4/RX8 5-41
SETUP prompt [Enabled]
When this item is set to Enabled, the system displays the message “Press DEL to
run Setup” during POST. Configuration options: [Disabled] [Enabled]
Interrupt 19 Capture [Enabled]
When set to [Enabled], this function allows the option ROMs to trap Interrupt 19.
Configuration options: [Disabled] [Enabled]
Item Specific Help
Save any changes to CMOS,
exit BIOS Setup then
reboot system.
Save Changes and Exit
Discard Changes and Exit
Discard Changes
Load Setup Defaults
5.8 Exit menu
Save Changes and Exit
Select this option then press , or simply press , to save your changes
to CMOS before exiting the Setup utility.
When a confirmation window appears:
• select [Yes], then press to save and exit.
• select [No], then press , or simply press , to cancel the command
and return to the Exit menu.
Discard Changes and Exit
Select this option then press if you wish to exit the Setup utility without
saving your changes.
When a confirmation window appears:
• select [Yes], then press to discard your changes and exit.
• select [No], then press , or simply press , to cancel the command
and return to the Exit menu.
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →← : Select Menu Enter: Select SubMenu F10: Save and Exit
PhoenixBIOS Setup Utility
Main Advanced Server Security Boot Exit