1 chassis cover, 1 removing the front bezel – Asus RS260-E4/RX8 User Manual

Page 22

Chapter 2: Hardware setup

2-2

2.1

Chassis cover

The chassis features a “screwless design” that allows convenient assembly and

disassembly.
•

Remove the front bezel to access the hot-swap HDDs, optical drive, and

floppy drive.

•

Remove the chassis cover to access the internal components or if you want

to install system devices.

2.1.1

Removing the front bezel

To remove the front bezel:
1. Hold the sides of the front bezel,

then slightly press the middle part to

disengage it from the front panel.

2. Pull the bezel from the front panel.

Press here to release

The ASUS stylish front bezel is purchased separately.