Asus RS260-E4/RX8 - Manual (Page 110)

5-24 Chapter 5: BIOS setup
Item Specific Help
Select ‘Yes’ if you
want to clear the
Extended System
Configuration Data
(ESCD) area.
PCI Configuration
Reset Configuration Data [No]
Plug & Play OS [No]
Palette Snooping [Disabled]
PCI Device, Slot #1
PCI Device, Slot #2
PCI Device, Slot #3
PCI Device, Slot #4
PCI Device, Slot #5
PCI Device, Slot #6
PhoenixBIOS Setup Utility
Advanced
5.4.3 PCI Configuration
This menu shows the PCI configuration settings. Select an item then press
to display the configuration options.
Reset Configuration Data [No]
This item allows you to clear the Extended System Configuration Data (ESCD)
area. Configuration options: [No] [Yes]
Plug & Play O/S [No]
When set to [No], BIOS configures all the devices in the system. When set to
[Yes] and if you install a Plug and Play operating system, the operating system
configures the Plug and Play devices not required for boot.
Configuration options: [No] [Yes]
Palette Snooping [Disabled]
When set to [Enabled], the palette snooping feature informs the PCI devices that
an ISA graphics device is installed in the system so that the latter can function
correctly. Configuration options: [Disabled] [Enabled]
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →← : Select Menu Enter: Select SubMenu F10: Save and Exit