Rear half – Asus RS260-E4/RX8 User Manual

Page 24

Chapter 2: Hardware setup

2-4

Rear half

3. Firmly hold the rear half of the

top cover, then remove it from the

chassis.

To remove the rear half of the top cover:
1. Loosen the thumbscrew that

secures the top cover on the rear

part of the chassis.

You need to remove the front half of the top cover before you can remove the

rear half of the top cover. Refer to section “2.1.2 Removing the top cover (front

half)” for instructions.

The barebone server without the top

cover is shown on the right.

Thumbscrew

2. Remove the screw on the rear half

of the cover.