Asus RS260-E4/RX8 - Manual (Page 113)

ASUS RS260-E4/RX8 5-27
Item Specific Help Peripheral Devices Configuration
COM1 Port: [Enabled]
Base I/O address: [3F8]
Interrupt: [IRQ 4]
COM2 Port: [Enabled]
Mode: [Normal]
Base I/O address: [2F8]
Interrupt: [IRQ 3]
Parallel port: [Enabled]
Base I/O address: [378]
Interrupt: [IRQ 7]
Mode: [ECP]
DMA channel [DMA 3]
Floppy disk controller [Enabled]
PhoenixBIOS Setup Utility
Advanced
5.4.5 Peripheral Devices Configuration
This menu shows the peripheral devices configuration settings. Select an item
then press to display the configuration options.
COM1 Port [Enabled]
Allows you to configure COM1 port.
Configuration options: [Disabled] [Enabled] [Auto]
Base I/O address [3F8]
Allows you to select the base I/O address for COM1 port.
Configuration options: [3F8] [2F8] [3E8] [2E8]
Interrupt [IRQ 4]
Allows you to set the interrupt for COM1 port
Configuration options: [IRQ 3] [IRQ 4]
COM2 Port [Enabled]
Allows you to configure COM2 port.
Configuration options: [Disabled] [Enabled] [Auto]
Mode [Normal]
Allows you to set the mode for COM2 port.
Configuration options: [Normal] [IR] [ASK-IR]
Base I/O address [2F8]
Allows you to select the base I/O address for COM2 port.
Configuration options: [3F8] [2F8] [3E8] [2E8]
Interrupt [IRQ 3]
Allows you to set the interrupt for COM2 port.
Configuration options: [IRQ 3] [IRQ 4]
Confugure serial port
A using options:
[Disabled]
No configuration
[Enabled]
User configuration
[Auto]
BIOS or OS chooses
configuration
(OS Controlled)
Displayed when
controlled bt OS
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →← : Select Menu Enter: Select SubMenu F10: Save and Exit