beautypg.com

1 setting up raid, 1 raid definitions – Asus RS260-E4/RX8 User Manual

Page 130

background image

6-2

Chapter 6: RAID configuration

6.1

Setting up RAID

The motherboard comes with the following RAID solutions:

LSI1068 PCI-X SAS controller supports SAS disk drives and RAID0, RAID1,

and RAID1E configuration.

6.1.1

RAID definitions

RAID 0

(Data striping) optimizes two identical hard disk drives to read and write

data in parallel, interleaved stacks. Two hard disks perform the same work as a

single drive but at a sustained data transfer rate, double that of a single disk alone,

thus improving data access and storage. Use of two new identical hard disk drives

is required for this setup.
RAID 1

(Data mirroring) copies and maintains an identical image of data from one

drive to a second drive. If one drive fails, the disk array management software

directs all applications to the surviving drive as it contains a complete copy of

the data in the other drive. This RAID configuration provides data protection and

increases fault tolerance to the entire system. Use two new drives or use an

existing drive and a new drive for this setup. The new drive must be of the same

size or larger than the existing drive.
RAID 1-E

(Enhanced RAID 1) has a striped layout with each stripe unit having a

secondary (or alternate) copy stored on a different disk. You can use three or more

hard disk drives for this configuration.
RAID 5 stripes both data and parity information across three or more hard disk

drives. Among the advantages of RAID 5 configuration include better HDD

performance, fault tolerance, and higher storage capacity. The RAID 5 configuration

is best suited for transaction processing, relational database applications,

enterprise resource planning, and other business systems. Use a minimum of

three identical hard disk drives for this setup. Available when you install an optional

ZCR.

If you want to boot the system from a hard disk drive included in a created RAID

set, copy first the RAID driver from the support CD to a floppy disk before you

install an operating system to the selected hard disk drive.