4 front panel led and switch board – Asus RS260-E4/RX8 User Manual

Page 54

Text mode
Original mode

Chapter 2: Hardware setup

2-34

2.7.4

Front panel LED and switch board

To uninstall the front panel and swtich board:
1. Disconnect all cables connected to the rear of the board.
2. Remove sticker on the front panel and unscrew the board to the chassis.

Front side

Rear side

Locator switch connector (blue/white)

Panel connector

Front USB connector

Locator LED connector (red/black)

3. Carefully remove the board out of the chassis.

When removed, the LED and switch board appears as shown. The LEDs and

switches on the board correspond to the LEDs and buttons on the system front

panel.