4 hard disk drives – Asus RS260-E4/RX8 User Manual

Page 38

Chapter 2: Hardware setup

2-18

2.4

Hard disk drives

To install a hard disk drive:
1. Open the front bezel to access the

hot-swap drive trays.

2. Release a drive tray by pushing the

spring lock to the right, then pulling

the tray lever outward. The drive

tray ejects slightly after you pull out

the lever.

3. Firmly hold the tray lever and pull

the drive tray out of the bay.

4. An empty drive tray includes a metal

bracket for support. Use a Phillips

(cross) screwdriver to remove the

bracket if you wish to install a hard

disk in the drive tray.

Metal bracket