Asus RS260-E4/RX8 - Manual (Page 136)

6-8 Chapter 6: RAID configuration
2. The Select New Array Type screen apprears.
Use the arrow keys to select Create IME Volume, then press .
6.2.2 Integrated Mirroring Enhanced
To create an IME volume:
1. The Adapter Properties screen appears.
Use the arrow keys to select RAID Properties, then press .
Esc = Exit Menu F1/Shift+1 = Help
Enter = Select Item -/+ = Change Item
LSI Logic Config Utility v6.08.05.00 (2006.08.02)
Adapter Properties -- SAS1068
Adapter SAS1068
PCI Slot 00
PCI Address(Bus/Dev/Func) 05.03.00
MPT Firmware Revision 1.15.00.00-IR
SAS Address 500E0180:60831008
NVIDIA Version 25.02
Status Disabled
Boot Order 0
Boot Support (Enabled OS only)
RAID Properties
SAS Topology
Advanced Adapter Properties
Esc = Exit Menu F1/Shift+1 = Help
Enter = Choose array type to create
LSI Logic Config Utility v6.08.05.00 (2006.08.02)
Select New Array Type -- SAS1068
Create IM Volume Create Integrated Mirror Array of 2
disks plus an optional hot spare. Data
on the primary disk may be migrated.
Create IME Volume Create Integrated Mirrored Enhanced
Array of 3 to 8 disks including an
optional hot spare.
ALL Data on array disks will be deleted!
Create IS Volume Create Integrated Striping array of
2 to 8 disks.
ALL Data on array disks will be deleted!