Asus RS260-E4/RX8 - Manual (Page 126)

5-40 Chapter 5: BIOS setup
F1 Help ↑↑ Select Item -/+ Change Values F9 Setup Defaults
ESC Exit ↑↑ Select Menu Enter Select Sub-Menu F10 Save and Exit
Item Specific Help
Allows the BIOS to
skip certain tests
while booting. This
will decrease the time
needed to boot the
system.
Boot Features
Quick Boot [Enabled]
Full Logo Display [Enabled]
Bootup Num-Lock [On]
PS/2 Mouse [Auto Detect]
Summary screen: [Enabled]
POST Errors [Enabled]
SETUP prompt [Enabled]
Interrupt 19 Capture [Enabled]
5.7.2 Boot Features
Quick Boot [Enabled]
Enabling this item allows the BIOS to skip some power on self tests (POST) while
booting to decrease the time needed to boot the system. When set to [Disabled],
BIOS performs all the POST items.
Configuration options: [Disabled] [Enabled]
Full Logo Display [Enabled]
Allows you to enable or disable the full screen logo display feature.
Configuration options: [Disabled] [Enabled]
Bootup Num-Lock [On]
Allows you to select the power-on state for the NumLock.
Configuration options: [Auto] [On] [Off]
PS/2 Mouse [Auto Detect]
Allows you to enable or disable support for PS/2 mouse.
Configuration options: [Disabled] [Enabled] [Auto Detect]
Summary screen: [Enabled]
When this item is enabled, the system configuration is displayed during POST.
Configuration options: [Disabled] [Enabled]
POST Errors [Enabled]
When set to Enabled, the system waits for the F1 key to be pressed when error
occurs. Configuration options: [Disabled] [Enabled]
PhoenixBIOS Setup Utility
Main Advanced Server Security Boot Exit
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →← : Select Menu Enter: Select SubMenu F10: Save and Exit