Asus RS260-E4/RX8 - Manual (Page 23)

ASUS RS260-E4/RX8 2-3
2.1.2 Removing the top cover
Front half
To remove the front half of the top cover:
1. Push the two sliding locks on the
top cover to release.
2. With both hands, flip up the front
corners of the top cover, then lift.
The front corners of the cover
have dents that match those on
the chassis. These dents provide a
holding mechanism and keeps the
cover in place even when the sliding
locks are released.
If you wish to access the hot-swappable system fans, backplanes, optical drive,
and floppy disk drive, just remove the front half of the top cover.
Matching dents