GE Industrial Solutions Entellisys 4.0 System Test Kit User Manual - Manual (Page 16)

System Test Kit 16
1.4.4 General navigation
X Quit
Quit allows the user to quit from the application and shut down the system.
? Help
Clicking Help provides the user with help on the selected screen.
Tips
Moving the mouse cursor over the control provides tips for that control.
Short Cut Keys
Short cut keys are provided for the following controls:
F1 Pressing F1 will display help
F4 Main Menu
Ctrl F4 Back
F10 Quit the application
1.5 Download switchgear configuration
The test kit requires information about the switchgear lineup under test. For example:
•
Circuit breakers by name, for ease of identification
•
For each circuit breaker:
• Circuit breaker frame size, CT rating, and PT rating
• Rating switch setting
• Protection options enabled
• Protection elements Pickup and Delay Band Settings
This data provides the operator valid selections when selecting tests, and provides the proper
output levels for the “Pre-Defined” Tests.
Once downloaded, this step can be avoided by using the “Last Download” information—so long
as no configuration or settings have changed.
In Entellisys 4.0 systems, care must be taken since their IOC, ST and LT relay settings may
change if the current topology changes.
NOTE: To ensure the test kit has the correct configuration, download the configuration rather
than using the “Last Download”.