GE Industrial Solutions AF-600 FP Fan and Pump Drive (460V_575V 150HP and above) - Manual (Page 76)

[Info]
The [Info] key displays information about a command, parameter, or function in any display window. [Info] provides detailed information when needed.
Exit Info mode by pressing either [Info], [Back], or [Cancel].
Navigation Keys
The four navigation arrows are used to navigate between the different
choices available in [Quick Menu], [Main Menu] and [Alarm Log]. Use the
keys to move the cursor.
[OK] is used for choosing a parameter marked by the cursor and for enabling
the change of a parameter.
Operation Keys for local control are found at the bottom of the control panel.
[Hand]
The [Hand] key enables control of the frequency converter via the keypad. [Hand ] also starts the motor, and it is now possible to enter the motor speed data by
means of the arrow keys. The key can be selected as Enable [1] or Disable [0] via par. K-40 [Hand] Button on Keypad.
The following control signals will still be active when [Hand ] is activated:
• [Hand ] - [Off] - [Auto ]
• Reset
• Coasting stop inverse
• Reversing
• Set-up select lsb - Set-up select msb
• Stop command from serial communication
• Quick stop
• DC brake
AF-600 FP High Power Operating Instructions
75
6