Ocean Optics NeoFox - Manual (Page 22)

2: Installation
12 013-20000-009-02-201203
8. If you are using an Oxygen probe, locate the 21-02 SMA Splice Bushing that came with the
probe. This item is a 0.75" screw with two female ends. Screw one end of the splice bushing into
the SMA 905 connector on the end of the probe. If you are using the RedEye Patch, you don’t
need the splice bushing.
Installing NeoFox Hardware Drivers
When you connect NeoFox to a computer for the first time using the USB cable, you must then install the
appropriate hardware drivers. This procedure differs, depending on whether you are using Windows XP
or Windows Vista as the operating system.
Installing Hardware Drivers Using Windows XP
The following Found New Hardware wizard appears when you first attach NeoFox to computers running
the XP operating system.