Peerless-AV ACC942 - Installation - Manual (Page 9)

ISSUED: 12-01-08 SHEET #: 120-9065-2 08-18-09
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
9 of 25
THIS IS FOR CONCEPT ONLY.
ECN DATE:
7.00
7.29
12.13
4.92
1
Use lock-down plate as a template to mark location of holes, point 1 and point 2, exactly 7" apart on table. Drill two
holes using a 1/4'' drill bit.
42PQ30C
POINT 1
POINT 2
TABLE TOP
2
Slide two 1/4-20 x 1 3/4" bolts through slots on lock down plate as shown below. (supplied in HLG-452-001)
Note: 2 1/4" carriage bolts (ACC939) are available for use with thicker mounting surfaces.
Installation Option for (HLG452-001) 42PQ30C
RUBBER FEET
(PLACE ON TOP OF EXISTING FEET)
DISPLAY MODEL HOLE PATTERN
#10 x 3/8 phillips self drilling screws ( D)
42PQ30C
3
LOCK-DOWN PLATE
ENSURE PROPER
ORIENTATION OF
LOCK-DOWN PLATE