Peerless-AV FLD-UNV-S - Installation - Manual

ISSUED: 07-05-05 SHEET #: 124-9422-2 05-07-08
For customer service call 1-800-729-0307 or 708-865-8870. Visit the Peerless Web Site at www.peerlessmounts.com
1 of 3
Before you start check the parts list to insure all of the parts shown are included.
Note: Some parts may appear slightly different than illustrated.
E
A
Read instruction sheet before you start installation and assembly.
Model: FLD-UNV (-S)
Installation and Assembly - Universal lockdown brackets for
Plasma and LCD Desktop Stands
FLD-UNV FLD-UNV-S
Description Qty Part # Part #
A front lockdown bracket 2 124-1063 124-4063
B back lockdown bracket 2 124-1062 124-4062
C 10-16 x 3/4 penta pin screw 2 520-9258 520-9281
D M5 x 1" penta pin tool driver 1 520-9249 520-9249
E #8 x .5 phillips screw 4 500-1011 500-1011
F #14 nylon cap cover 2 560-1158 590-4190
G washer 12 540-9400 540-9400
H #8 x 3/4" phillips screw 4 500-1003 500-1003
Parts List
B C
D
G F
Position TV stand to proper location and mark front
of the stand on the desktop.
NOTE: Stand may appear different then illustrated.
Flip TV stand upside down and measure from the
front of the stand to the center of the screw as
shown in detail 1 to get dimension x. Add 1.035"
to get the mounting location of the front lockdown
bracket (A).
FRONT OF TV STAND
DETAIL 1
Remove screws that hold screen to the stand as
shown below.
TV STAND
FRONT
BOTTOM VIEW
TOP VIEW
BACK OF SCREEN
x
H
FRONT OF TV STAND