beautypg.com

Peerless-AV DCT500 - Installation User Manual

Warning, Cd e f

background image

1 of 1

ISSUED: 05-05-99 SHEET #: 128-9020-3 04-21-05

Visit the Peerless Web Site at www.peerlessindustries.com

For customer service call 1-800-729-0307 or 708-865-8870.

A

B

PART #

QTY.

DESCRIPTION

A 128-0422

1

tray

B 128-1194

2

clamps for i-beam

C 520-1018

4

1/2-13 X 2" square head bolt

D 520-1019

4

1/2-13 X 1" carriage bolt

E 530-1008

4

lock nut 1/2-13

F

540-2005

4

flat washer 1/2-13

For customer service call 1-800-729-0307 or 708-865-8870. Visit the Peerless Web Site at www.peerlessindustries.com.

Note: Read entire instruction sheet before you start
installation and assembly.

Before you start make sure
all parts shown below are
included with your product.

Installation and Assembly - Heavy Duty I-Beam Clamp with Decoupler

Model:

DCT500

Parts List

Note: Some parts may appear slightly different than illustrated.

C

D

E

F

Note: For each step see corresponding illustration.
Attach brackets (B) to tray (A) using four 1/2-13 X 2"
square head bolt (C), washers (F), and lock nuts (E).
Do not fully tighten. Start four 1/2-13 X 1" carriage
bolts (D) into clamps (B).

Adjust clamps (B) securely around I-Beam. Tighten
(C,F,E) securely. Tighten four bolts (D) securely.
Attach the extension column according to the
instructions provided with it. Use a level to make
sure the column is plumb and make adjustments as
necessary.

B

D

I-Beam

Maximum load rating 600 lbs (272 kg) Combined weight to all attached hardware and
components is not to exceed 600 lbs (272 kg).

5" (127 mm)

adjustment range

B

R

This product is intended for use with UL
Listed products and must be installed by a
qualified professional installer.

© 2004 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.

• If multi-display system, in combination with compo-

nents exceeds 600 lbs (272 kg) it therefore exceeds
the maximum load. Heavy Duty I-Beam Clamp with
Decoupler will not safely support a combined load
which exceeds 600 lbs (272 kg).

WARNING