Peerless-AV ACC942 - Installation - Manual (Page 20)

ISSUED: 12-01-08 SHEET #: 120-9065-2 08-18-09
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
20 of 25
5.26
15.90
16.98
14.98
4.26
13.498
3.86
11.38
3.35 MAX
12.80
11.80
1.00 1.00
7.25
1.00
Note: Use this option when back brackets cannot be flipped when a longer distance from the back of the table is
desired. Flip TV stand upside down and attach four additional rubber pads ( C) over existing pads.
1
# 8 x 1/2 phillips screw
The width is measured and located 7.95" from center line of display as shown below.
Attach both front lock-down brackets to desktop using two #8 x 3/4 phillips screws and washers as shown in fig
3.1. (supplied in FLD-UNV-LG)
Note: Use the same number of washers for both front lock-down brackets.
Extra washers are included in case additional height is required as shown in detail 2. Two are recommended
for each screw.
fig. 1.1
Rubber pads ( C)
(PLACE ON TOP OF EXISTING FEET)
DETAIL 2
DESKTOP
Note: Back lock-down bracket may be placed with flange facing up to allow the display to be positioned further forward
as shown below.
BACK EDGE OF DESKTOP
52LG50DC Option 2
DETAIL 3 DETAIL 4