Peerless-AV PLP-V2X1 - Installation User Manual

Parts list

ISSUED: 11-20-07 SHEET #: 202-9258-2 06-25-08

Visit the Peerless Web Site at www.peerlessmounts.com

For customer service call 1-800-729-0307 or 708-865-8870.

1 of 1

Parts List

TS LIST

Description

Qty.

Part #

AA adapter bracket- top plate

200-4289

BB adapter bracket- bottom plate

200-4340

CC M6 x 10 mm socket pin screw

520-2066

DD M4 x 16 mm socket pin serrated washer head screw

510-2087

EE .5 OD x .44 ID x .19 bushing

590-1116

4 mm security allen wrench

560-9646

Note: Actual parts may appear slightly different than illustrated.

IMPORTANT! Read entire instruction sheet before you start installation and assembly.

Use four M6 screws (CC) to attach top plate (AA) to bottom plate (BB) using security allen wrench (FF).
NOTE: Top plate (AA) will have one set of threaded holes on one side and a set of non-threaded holes on the other side. Bottom plate
will also have one set of threaded holes on one side and a set of non-threaded holes on the other side. All four M6 screws should pass
through non-threaded holes first and into threaded holes.

A A

VESA 100
MOUNTING
PATTERN

FOR VESA 100 MOUNTING PATTERN - Sharp LC30HV2U
Use four M4 screws (DD) and four bushings (EE) to attach
bottom plate (BB) to monitor using security allen wrench (FF).
Use four center holes of plate as shown below.

MONITOR

Models:
PLP V2X1,
PLP V2X1-S

MONITOR

100 x 200
MOUNTING
PATTERN

FOR VESA 100 X 200 MOUNTING PATTERN - NEC LCD3000-BK
Use six M4 screws (DD) and six bushings (EE) to attach bottom
plate (BB) to monitor using security allen wrench (FF). Use six
slots on plate as shown below. Align upper end of slots with
screen mounting holes.

Installation and Assembly - Adapter Bracket for

VESA

200 x 100 Screens

All other brand and product names are trademarks or registered trademarks of their respective owners.