Peerless-AV ACC942 - Installation - Manual (Page 7)

ISSUED: 12-01-08 SHEET #: 120-9065-2 08-18-09
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
7 of 25
6.17
7.00
6.23
3.000
13.50
4.71
7.94
7.00
13.50
7.00
3.80
2
Slide two 1/4-20 x 1 3/4" bolts through slots on lock down plate as shown below. (supplied in HLG-452-001)
Note: 2 1/4" carriage bolts (ACC939) are available for use with thicker mounting surfaces.
1
Use lock-down plate as a template to mark location of holes, point 1 and point 2, exactly 7" apart on table. Drill two
holes using a 1/4'' drill bit.
Installation (HLG452-001) 52LG50DC
52LG50DC
TABLE TOP
POINT 1 POINT 2
RUBBER FEET
(PLACE ON TOP OF EXISTING FEET)
C. 52LG50DC
M5 x 12 mm phillips screws ( A)
.25 ID x .5 OD x .25 spacers ( B)
Place spacer ( B) between lock down
plate and the base of the screen.
DISPLAY MODEL HOLE PATTERN
3
LOCK-DOWN
PLATE
ENSURE PROPER
ORIENTATION
OF LOCK-DOWN
PLATE