Peerless-AV PLP-V8X4 - Installation User Manual

Warning, Aa dd 1 ee ff or ee gg aa, Bb, cc or dd ff

ISSUED: 11-09-07 SHEET #: 202-9250-2 11-04-08

Visit the Peerless Web Site at www.peerlessmounts.com

For customer care call 1-800-729-0307 or 708-865-8870.

1 of 1

Parts List

Description

Qty.

Part #

AA adapter bracket

201-1433

BB M6 x 12 mm serrated washer head socket pin screw

510-1050

CC M5 x 12 mm serrated washer head socket pin screw

510-1064

DD M8 x 15 mm socket pin screw

520-1068

EE #10 SAE flat washer

540-9400

FF 1/4" SAE flat washer

540-9440

GG 4 mm security allen wrench

560-9646

Installation and Assembly - Adapter Bracket for

VESA

800 x 400 Screens

Model:

PLP-V8X4

Some parts may appear slightly different than illustrated.

Before you start make sure all parts listed are included with your product.

IMPORTANT! Read instruction sheet before you start installation and assembly.

• Do not overtighten. Overtightening may cause permanent damage to the screen. Torque to 26-35 in • lb (30-40 kg • cm).

WARNING

FF or EE

All other brand and product names are trademarks or registered trademarks of their respective owners.

Begin with four M5 x 12 mm serrated washer
head socket pin screws (CC), hand thread
through #10 SAE flat washer (EE) and adapter
plate (AA) into screen as shown below. Do not
over tighten. If screw is too small, select four
M6 x 12 mm serrated washer head socket pin
screws (BB) and 1/4" SAE flat washers or four
M8 x 15 mm socket pin screws (DD). Tighten
screws.

NOTE: Screw must make at least three full
turns into the mounting hole and fit snug into
place. If you have any questions, please call
Peerless customer care at 1-800-865-2112.

NOTE: Spacers may not be used,
depending upon the size of screw.

BB, CC
or DD