Peerless-AV ACC942 - Installation - Manual (Page 17)

ISSUED: 12-01-08 SHEET #: 120-9065-2 08-18-09
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
17 of 25
Note: Back lock-down bracket may be placed with flange facing up to allow the display to be positioned further forward
as shown below.
BACK EDGE OF DESKTOP
5.26
15.90
16.98
14.98
4.26
13.498
3.86
11.38
3.35 MAX
12.80
11.80
1.00 1.00
7.25
1.00
Note: Use this option when back brackets cannot be flipped when a longer distance from the back of the table is
desired. Flip TV stand upside down and attach four additional rubber pads ( C) over existing pads.
1
# 8 x 1/2 phillips screw
The width is measured and located 7.95" from center line of display as shown below.
Attach both front lock-down brackets to desktop using two #8 x 3/4 phillips screws and washers as shown in fig
3.1. (supplied in FLD-UNV-LG)
Note: Use the same number of washers for both front lock-down brackets.
Extra washers are included in case additional height is required as shown in detail 2. Two are recommended
for each screw.
fig. 1.1
47LG50DC Option 2
Rubber pads ( C)
(PLACE ON TOP OF EXISTING FEET)
DETAIL 2
DESKTOP
DETAIL 3 DETAIL 4