PowerWalker ViewPowerMini - Manual (Page 51)

50
5.3.2. Scheduled On/Off
Scheduled UPS on/off can be executed once, daily, weekly. In the window “Scheduled
On/Off Setting”, users can choose time parameters. It is recommended to set only one
action in the same time. If multiple actions have been specified at the same time,
some of these actions may be ignored. Any actions which are not supported by the UPS
will be ignored.
Step 1 Select “Control” >> Scheduled On/Off. Refer to Diagram 5­19.
Diagram 5­19
Step 2 Set frequency and setting time on the right column.
NOTE: Rules for setting time.
Daily schedule – Power­off time should be earlier than power­on time. It only
applies to set power­on time and power­off time within the same day.
Weekly schedule –Power­off time should be earlier than power­on time. It only
applies to set power­on time and power­off time within the same week.
Step 3: Click “Add” to add task. If task is successfully set, it will display on the task
table on the left­hand side. Select specific task and click “Delete” button to delete
the task.