PowerWalker ViewPowerMini - Manual (Page 38)

37
Diagram 5­8
Step 2: Click “Refresh” to reload the status of com. ports.
Step 3: Click “Forbid scanned” to stop scanning on this com. port. Click “Allow scanned”
to start scanning on this com. port.
5.1.7. Log Setting
Users can set up “Record Interval”, “The max. Numbers of logs for historical data”, and
“The max. Numbers of logs for historical events” according to real situation.
The setting range for “Record internal” is 30~600 seconds. It will effect history data
displayed under View –> History.
The setting range for “The max. Numbers of logs for historical data” is
100000~100000000. It will effect displayed data under View –> History.
The setting rang for “The max. Numbers of logs for historical events” is
100000~100000000. It will effect displayed data under View ­> Event log.
Step 1 Select ViewPowerMini configuration>>Log setting. Refer to Diagram 5­9.