PowerWalker ViewPowerMini - Manual (Page 4)

3
dialog for current UPS status.
NOTE: Tray icon only exists under Windows OS.
1.3. Features
l Real­time dynamic graphs of UPS data (voltage, frequency, load level, battery
capacity)
l Safely OS shutdown and protection from data loss during power failure
l Warning notifications via audible alarm, pop­up screen, broadcast, mobile
messenger, and e­mail
l Scheduled UPS on/off, battery test, programmable outlet control, and audible
alarm control
l Password security protection
2. ViewPowerMini Install and Uninstall
2.1. System Requirement
l 512 MB physical memory at least (1 GB is recommended)
l 1 GB hard disk space at least
l Administrator authority is required
l More than 16­bit colors and 800 x 600 or above resolution display is
recommended
l An available communication port (RS232 serial port or USB port) is needed
l Platforms supported by software are listed below:
Ø Windows 2000/XP/2003/Vista/2008/2012 (32­bit & x64­bit)
Ø Windows 7 / 8 (32­bit & x64­bit)
Ø Linux RedHat 8, 9
Ø Linux RedHat Enterprise AS3, AS5, AS6 (32­bit)
Ø Linux RedHat Enterprise AS6 (64­bit)
Ø Linux SUSE 10 (32­bit & 64­bit)