PowerWalker ViewPowerMini - Manual (Page 41)

40
Diagram 5­11
Ø Text Message: The description of the dry contact event.
Ø Default dry Contact: Define dry contact no. to send event message. There
are five selections: none, 1, 2, 3 and 4. If selecting any value from 1 to 4, any
environmental monitoring device (EMD) which is detected defined event will
send event message. If selecting none, it means this event is defined as special
event. Then, users can assign specific environmental monitoring device (EMD)
to receive this event message. Please refer this special event setting in “Dry
contact configuration” section.
l Dry contact configuration: Users can define special events with assigned dry
contact no. for specific environmental monitoring device (EMD). If any defined
event is detected by assigned device via assigned dry contact no., it will send
alarm message via software. Refer to Diagram 5­12.