PowerWalker ViewPowerMini - Manual (Page 37)

36
Step 1 Select ViewPowerMini Configuration >> Wake on LAN. Refer to Diagram 5­7.
Diagram 5­7
Step 2 Add: Enter MAC address and click “Add” button to add in MAC List. Delete:
Select one from list and click “Delete” button. Test: Select one from list and
click “Test” button. Then it will execute Wake­on­LAN test.
NOTE: The MAC address format example: 01­1F­C6­C7­E0­08.
5.1.6. Com.Port Plug And Play Setting
To real­time monitor UPS device, the software will scan each com. port anytime. In this
way, it will occupy com. port. If you allow software scan com. port. It will list each com.
port. Then users can select “Allow scanned” or “forbid scanned” to re­scan or release
com. ports based on their requirements.
Step 1: Select ViewPowerMini configuration>>Com.port plug and play setting. Refer to
Diagram 5­8.