PowerWalker ViewPowerMini - Manual (Page 45)

44
power off. The default setting is clicked.
Power­off option: Selecting power­off method for above shutdown system.
l Shutdown: When clicking the checkbox, the selected system will shut down. The
default setting is clicked.
l Sleep mode: When clicking the checkbox, selected system will suspend the
system instead of a normal shutdown. But this function is only supported by
Windows 2000 or higher on supported hardware.
Delay time to shutdown system: Enter the delay time to shut down the
operating system. The value range is from 1 to 99 minutes.
On shutdown execute file: Enter the path of execute file.
Warning Dialog Setting:
l Pop­up dialog before shutdown: Timer setting for pop­up warning dialog
displayed in local PC. Local PC will pop up a warning dialog before system
starts to shut down. The range is from 1 to 999 seconds.
l Warning dialog interval: Reminding dialog interval setting. This setting also
applies for UPS shutdown because of power failure. The range is from 1 to 999
seconds.
5.2.2. Remote Shutdown
This configuration is to remote shut down specific PCs which are powered by monitored
UPS.
Step 1 Select UPS Setting >> Remote Shutdown. Refer to Diagram 5­15.