B&B Electronics GW-7472 - Manual - Manual (Page 36)

GW-7472 User Manual, Version 1.0, Dec 2010 --- 36
Step1: Click the
“Download” item to open the “Firmware Download” dialog.
Step2: Enter the MAC address of the GW-7472 and an available IP address which will be
temporally assigned to the GW-7472 via the BOOTP protocol. After finishing the
firmware update, this IP address is useless.
Step3: Select the firmware which will be updated.
Step4: Click the
“Download” button to start the update procedure.
Available IP:
This parameter is an available IP address on the Ethernet network. During the update
procedure, the GW-7472 will use this IP address. You can also assign the IP address which is
used in the run mode of the GW-7472. Contact your network administrator for more information
about an available IP address.
MAC Address:
This parameter is the MAC address of the GW-7472. You can get it from the Utility tool.
Please refer to section “4.2.1 Network Settings”
Select File:
The
folder path of the new firmware can’t include the character “ “(the space character). Or the
update procedure may be broken.