B&B Electronics ESR901WB - Manual - Manual (Page 30)

Using the Web Configuration and Management Interface
Manual Documentation Number: ESR901WB-2907m pn6870-rev002
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
20 Chapter 5
Configuring the Serial Port
The Serial Port Configuration page displays information about the serial
port on your ESR901WB, including its description, its profile (operating
mode) and serial settings (baud rate, data bits, parity, stop bits). You will
have to configure these parameters to set up your system for the type of
operation required and to match the parameters of the serial device to which
the ESR901WB is connected.
To open the Serial Port Configuration page, under the Configuration
menu click Serial Ports. When you first access this page a list of ports, their
description, profile and serial configuration appears. (If the ESR901WB has
not yet been configured for the first time the Profile column may indicate
.)
To access detailed settings for the ESR901WB serial port, click Port 1. The
Serial Port Configuration page that appears includes three sections with
hyperlinked menu bars.
• Port Profile Settings
• Basic Serial Settings
• Advanced Serial Settings
Port Profile Settings
The Port Profile Settings section displays the current serial port mode of
operation, a description of that profile and a hyperlink to Change Profile…
Click the Change Profile… menu bar to open the Select Port Profile page.
Any of eight possible serial port profiles can be selected.