B&B Electronics ESR901WB - Manual - Manual (Page 24)

Configuring the ESR901WB
Manual Documentation Number: ESR901WB-2907m pn6870-rev002
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
14 Chapter 4
Identify your ESR901WB by its MAC address (printed on a label on
the ESR901WB).
If you need to change the IP address of the ESR901WB, you can
accomplish this using the discovery software, or you can open the
Web Configuration and Management Interface and do it there. (See
Configuring Network Settings later in the next chapter.)
1. To change the IP address of the ESR901WB from the discovery
software, click Configure IP Settings.
2. In the dialog that appears, select Manually configure network
settings.
3. Type the new IP Address, Subnet Mask, Default Gateway and
system password (initially dbps) in the appropriate boxes, then click
Apply.
4. Click Reboot Device. This may take a minute or more to complete.
5. Click Refresh List to confirm the new IP address has been
accepted.