Rainbow Electronics TS81102G0 - Manual (Page 33)

33
TS81102G0
2105C–BDC–11/03
Ordering
Information
Datasheet
Status
Description
Life Support
Applications These products are not designed for use in life-support appliances, devices or systems where
malfunction of these products can reasonably be expected to result in personal injury. Atmel
customers using or selling these products for use in such applications do so at their own risk
and agree to fully indemnify Atmel for any damages resulting from such improper use or sale.
Table 9. Ordering Information
Part Number Package Temperature Range Screening Comments
JTS81102G0-1V1A Die Ambient Visual inspection
TS81102G0CTP TBGA 240 "C" grade
0
°
C < Tc; Tj < 90
°
C
Standard
TS81102G0VTP TBGA 240 "V" grade
-40 ° C < Tc; Tj < 110 ° C
Standard
TSEV81102G0TPZR3 TBGA 240 Ambient Prototype Evaluation board (delivered
with heatsink)
Table 10. Datasheet Status
Datasheet Status Validity
Objective specification This datasheet contains target and
goal specifications for discussion with
customer and application validation. Before design phase
Target specification This datasheet contains target or
goal specifications for product
development. Valid during the design phase
Preliminary specification
α
-site
This datasheet contains preliminary
data. Additional data may be
published later; could include
simulation results. Valid before characterization
phase
Preliminary specification
β -site
This datasheet contains also
characterization results. Valid before the
industrialization phase
Product specification This datasheet contains final product
specification. Valid for production purposes
Limiting Values
Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress
above one or more of the limiting values may cause permanent damage to the device. These are
stress ratings only and operation of the device at these or at any other conditions above those given in
the Characteristics sections of the specification is not implied. Exposure to limiting values for extended
periods may affect device reliability.
Application Information
Where application information is given, it is advisory and does not form part of the specification.