Moog Music Minimoog Voyager Performer Edition - Manual (Page 71)

Page 72
Voyager User’s Manual - MASTER Mode Factory Setups
Page 73
Voyager User’s Manual - MASTER Mode Factory Setups
3.1 ENV GATES F/A (Envelope Gates Filter/Volume)
The ENV GATES F/A function restores the default settings for
the Filter and Amplitude Envelope Gates parameters stored
in the presets. The default is ENV GATE INPUT for both. To
restore the default Envelope gate settings, use the CURSOR
to select ‘YES’ and press ENTER. To leave this menu without
changes, select ‘NO’ and press ENTER.
3.2 GLOBAL CURSOR
This is a placeholder menu having no function. This feature will
be implemented in a future O.S. update.
3.3 CATEGORY RESET
The CATEGORY RESET function sets all preset categories
in the current bank to “Not Assigned” (other banks are not
affected). To reset the Categories to “Not Assigned”, select ‘YES’
and press ENTER. To escape without changes, select ‘NO’ and
press ENTER.
3.4 PITCH BEND AMT
The PITCH BEND AMOUNT function sets the Pitch UP and
DOWN values to “Fourths” (5 semitones) for all presets in the
current bank. To set the Pitch Bend Amount to “Fourths”, select
‘YES’ and press ENTER. To escape without changes, select ‘NO’
and press ENTER.
4.1 PEDAL AMOUNT
The PEDAL AMOUNT function resets the Pedal/ON Amount
to 0 (zero) for all presets in the current bank (other banks are
not affected). To reset the Pedal/ON Amount, select ‘YES’ and
press ENTER. To escape without changes, select ‘NO’ and press
ENTER.
4.2 POWER-ON SCREEN
The POWER-ON SCREEN function allows you to select the
original Voyager Power-on logo or the new version Power-on
logo. There is no difference in performance, but the new Power-
On screen displays the Moog logo and the software version.
To change the appearance of the Power-on screen, use the
CURSOR to select ‘YES’ and press ENTER. To leave this menu
without changes, select ‘NO’ and press ENTER.