Moog Music Minimoog Voyager Performer Edition - Manual (Page 47)

Page 48
Voyager User’s Manual - PANEL Mode
Page 49
Voyager User’s Manual - EDIT Mode
Edit Mode
Edit Mode is used to assign the parameters of a preset that are not accessible through the front panel
controls. Edit Mode is also used assign the preset sound category, set the MIDI clock divider, and name and
save presets. Press the EDIT button to enter Edit Mode.
To select an Edit Mode function, use the
-1/+1 buttons to hightlight the desired function and then press ENTER.
All Voyager editions (keyboard and rack mount) have the same twenty four Edit Mode functions that span
six pages as shown below.
Voyager/RME EDIT menus
In addition to the functions shown above, Edit Mode also features an octave transpose function that allows
you to shift the Voyager’s Keyboard up to plus or minus two octaves. To access the transpose menu at any
time, press the EDIT button twice (press once if already in Edit
Mode). The display will appear as shown at left. Use the -1/+1
buttons to transpose the octave as desired (NULL is the Voyager’s
default setting). The new transpose setting will remain until it is
changed, or until the Voyager is powered off.
To exit the transpose menu, press EDIT.
The Envelope Gate switch must be set to ‘KEYB’ (keyboard) for the
octave transposition feature to be utilized.