Moog Music Minimoog Voyager Performer Edition - Manual (Page 64)

Page 66
Voyager User’s Manual - MASTER Mode
Page 67
Voyager User’s Manual - MASTER Mode
SEND PRESET(S)
SEND PRESET(S) is a utility to send SysEx data for archiving a single preset
(‘PRESET NO. X’) or a complete bank of 128 presets (‘ALL PRESET
SOUNDS’). Use the CURSOR to select either the single preset or bank
option. If the single preset option is selected, the -1/+1 buttons are used
to specify the preset number. Only presets from the current bank can be
selected.
The SEND PRESET(S) utility requires another Voyager, or a computer with
a MIDI interface and a program that can accept a manual SysEx dump.
You must enable the device that is to receive the SysEx data. Once the
remote device is enabled, press ENTER to start the data transfer. When
the transfer begins, the Voyager will display a ‘SYSTEM EXCLUSIVE DATA
IN PROGRESS’ message on the LCD. When the data transfer operation is
complete, the LCD will return to the Master Mode menu.
Although the SEND PRESET(S) and SEND PANEL SOUND utilities perform similar functions, they are
not the same. The difference is that if a single preset is saved using SEND PRESET(S), the storage loca-
tion of that preset is also saved, but with SEND PANEL SOUND it is not. This means that if you select and
save Preset 37 in SEND PRESET(S), that preset will load back into memory location 37 of the current
bank when restored, overwriting the preset stored there. If the same preset is saved using SAVE PANEL
SOUND, Preset 37 will reload into buffer of the current preset, allowing you to audition the sound without
overwriting the preset at that location.
MIDI IN ON/OFF (Keyboard editions only)
This function is used to enable (‘YES’) or disable (‘NO’) reception of
incoming MIDI data. Use the CURSOR to select the desired choice and
press ENTER.
MIDI OUT ON/OFF
This function is used to enable (‘YES’) or disable (‘NO’) transmission of
outgoing MIDI data. Use the CURSOR to select the desired choice and
press ENTER.
SEND PANEL SOUND
The SEND PANEL SOUND function allows the export of a single preset
as a System Exclusive (SysEx) MIDI file. This operation requires another
Voyager, or a computer with a MIDI interface and a program that can
accept a manual SysEx dump. You must enable the device that is to
receive the SysEx data. Once the remote device is enabled, press ENTER
to start the data transfer.